KIT-6负载CeO2催化CO2和甲醇合成碳酸二甲酯

采用不同老化温度(80、100、120和150℃)合成了一系列KIT-6载体,并通过浸渍法制备了相应的CeO_2/KIT-6催化剂。结合X射线衍射、N_2物理吸附、NH_3程序升温脱附、CO_2程序升温脱附、透射电子显微镜、傅里叶变换红外光谱和X射线光电子能谱等表征结果,详细考察了老化温度对KIT-6结构以及CeO_2/KIT-6催化剂直接催化CO_2和甲醇合成碳酸二甲酯(DMC)反应活性的影响。结果表明,不同老化温度下制备的KIT-6均保持其独特的三维孔道结构。随着老化温度升高,KIT-6比表面积先增大后减小,当老化温度为100℃时,KIT-6比表面积达到最大(683 m~2·g~(-1))。KIT-6较高的比表面积有利于提高CeO_2分散度,进而提高暴露的活性位点数量,催化活性随催化剂表面中等碱/酸性吸附位数量和Ce~(3+)含量的增加而逐渐提高。其中,CeO_2/100-KIT-6催化剂中CeO_2颗粒尺寸最小(5.9 nm),暴露的活性位数量最高,催化活性最佳。随后,考察了反应温度和压力对CeO_2/100-KIT-6催化活性的影响。随着反应温度提高,催化活性先升高后降低,当反应温度为140℃时,催化活性最高;且催化活性随反应压力的提高而逐渐增加。在反应温度为140℃、压力为6.8 MPa条件下,催化剂经6次循环后,DMC收率由15 mmol·g_(CeO_2)~(-1)逐渐降低至2.8 mmol·g_(CeO_2)~(-1),原因归结为反应过程中CeO_2纳米颗粒发生团聚,使暴露出的活性位数量减少。     

基于透明质酸构筑的药物递送载体及其应用

传统纳米药物控释载体主要通过细胞胞吞作用实现药物递送,其主要过程为被动靶向机制,因此会影响纳米载体在肿瘤组织的富集和治疗效果。近年来生物大分子透明质酸因其优异的水溶性、生物相容性、可降解性和肿瘤靶向性备受科研工作者青睐,已被广泛用于药物控释载体的构筑中,并成为靶向肿瘤治疗纳米载体领域的研究热点。本文根据透明质酸基纳米载体治疗机制的不同,从透明质酸基纳米载体在化疗、光热治疗、光动力治疗以及联合治疗的应用方面对其性能进行了总结和评述,并在此基础上展望了未来透明质酸基纳米治疗载体的研究方向和发展趋势。     

High capacity and cycling stability of poly(diaminoanthraquinone) as an organic cathode for rechargeable lithium batteries

Poly(1,5‐diaminoanthraquinone) is synthesized by oxidative polymerization of diaminoanthraquinone monomers and investigated as an organic host for Li‐storage reaction. Benefiting from its high density of redox‐active, Li⁺‐associable benzoquinone groups attached to conducting polyaniline backbones, this polymer undergoes its cathodic reaction predominately through Li⁺‐insertion/extraction processes, delivering a very high reversible capacity of 285 mAh g^?1. In addition, the PDAQ polymer cathode exhibits an excellent rate capability (125 mAh g^?1 at 800 mA g^?1) and a considerable cyclability with a capacity retention of ～160 mAh g^?1 over 200 cycles, possibly serving as a sustainable, high capacity Li⁺ host cathode for Li‐ion batteries. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 235–238     

Integrated One‐Flow Synthesis of Heterocyclic Thioquinazolinones through Serial Microreactions with Two Organolithium Intermediates

The synthesis of pharmaceutical compounds via short‐lived intermediates in a microreactor is attractive, because of the fast flow and high throughput. Additionally, intermediates can be utilized sequentially to efficiently build up a library in a short time. Here we present an integrated microfluidic synthesis of biologically active thioquinazolinone libraries. Generation of o‐lithiophenyl isothiocyanate and subsequent reaction with aryl isocyanate is optimized by controlling the residence time in the microreactor to 16 ms at room temperature. Various S‐benzylic thioquinazolinone derivatives are synthesized within 10 s in high yields (75–98 %) at room temperature. These three‐step reactions involve two organolithium intermediates, an isothiocyanate‐functionalized aryllithium intermediate, and a subsequent lithium thiolate intermediate. We also demonstrate the gram‐scale synthesis of a multifunctionalized thioquinazolinone in the microfluidic device with a high yield (91 %) and productivity (1.25 g in 5 min).     

考虑时滞的框架结构控制可靠性研究

提出了一种适合于确定框架结构可靠性计算方法．利用模态变换，把系统变为模态独立的振动方程，根据Field提出的假设，先定义阈值，假设控制后系统响应对阚值的穿阚率服从泊松分布，然后根据各模态的控制结果确定相应的可靠性．最后根据Veneziano提出的方法给出系统的可靠性。本文提出针对框架重点部位的控制输出来确定系统可靠性概念。考虑到实际情况，在控制方法选择针对系统不确定性具有较好控制效果的广义预测控制并考虑时滞影响。本文最后给出了计算实例。     

转子振动的灰色Verhuslt预测优化控制研究

以灰色预测控制理论为基础，首次将非线性GM模型引入到转子振动主动控制中，并采用现代控制理论中的二次型优化原理，以控制力和响应加权最小为目标函数，设计了转子系统振动的灰色Verhuslt预测优化控制方案。将该方案应用于带电磁阻尼器转子轴承系统的转子振动控制中，仿真结果显示转子振动的灰色预测Verhuslt优化控制是有效的、可行的。     

主动移频式动力吸振器及其动力特性的研究

动力吸振器是振动控制中比较有效的减振装置,只要吸振器(子系统)的振动固有频率与振动物体(主系统)的振动频率相同,即可有效地消除主系统的振动。但传统动力吸振器的控制频率带宽较窄,限制了其稳定性和减振效果的提高。本文通过独特的机械设计,研制了一种可以通过调节自身的几何参数,使得其固有频率随几何参数线性变化的主动移频的新型动力吸振器,并初步设定了相应的控制方法。文中还对其动力学特性进行了理论分析和实验测试,分析了它的机理,评估了它的实际减振效果。研究结果表明该吸振器可以大范围调节自身固有频率,有效拓宽吸振频带,具有良好的减振性能和稳定性。     

电磁约束阻尼层结构振动主动控制研究

基于弹性、粘弹性、电磁学理论,应用Hamilton原理,导出了覆盖电磁约束层阻尼(EMCLD)主动控制方式的梁的控制方程,并针对覆盖EMCLD的悬臂梁,进行了主动控制仿真模拟,得到了较好的控制效果,分析了控制电流和阻尼层厚度对控制效果的影响.结果表明电磁约束阻尼技术具有结构简单、作动方式合理、耗能低的优点,是一种有效的振动主动控制方式.     

LINEAR ACTIVE STRUCTURES AND MODES (Ⅰ)--BASIC CONCEPTS AND PROPERTIES

Some basic concepts about the active structures were firstly explained, and the main subjects to study in the field of active structure dynamics were synthesized. For the linear active structures, the annotations on the modes were done in detail. The physical meanings of the right and left eigenvectors were explained. The right eigenvectors are the modal shapes and the modal responses of an active structure depend on the left ones. The adjoint structure of an active structure was defined and the reciprocity theorem was interpreted. For two active structures, which are adjoint to each other and with the reciprocal gain-matrices, the right and left eigenvector are reciprocal. The relationship between an active structure and the corresponding passive structure is expressed with the transfer functions, which is employed to resolve the estimation problems.     

有限元网格自动生成及自动调整技术

本文给出了一种任意平面域内三角形网格自动生成及自动调整算法，并编制了相应的程序。通过对带Ｕ形槽的三点变曲试件的分析，证明本文算法是可行的，并且具有稳定性能好、收敛速度快的优点。